|Capacity||Up to 900M / HR|
|Head||Up to 180 Mtrs|
|Temperature||Up to 350 ºC|
|M.O.C.||Graded Cast Iron, NICI, WCB, CF8, CF8M, SS316L, CD4MCUN, Bronze, Alloy 20, Hastelloy ‘B’&‘C’, Etc.|
|Max Flow Rate||5 LPM to 500 LPM|
|Pressure||Up to 6 kg/cm2|
Features : End Suction Back Pull Out Design with Close, Semi Open and Open Impeller. Steady Flow, High Efficiency and Sturdy Construction. Low NPSH, Low Noise and Maintenance Free. Environmental Friendly & Shaft Deflection Below 0.05 mm. Pumps offered with Gland Packing and Mechanical Seals. Casing Cover Cooling or Heating Jacket is Possible. Impellers are balanced Dynamically. Simple External Axial Adjustment for ImpellerWear and Tear in some Designs. Design in accordance with 24255 / EN 733, 24256 / ISO 2558, ANSI B 73.1. Deep Groove Ball Bearings / Double Row Angular Contact Ball Bearings / Cylindrical Roller Bearings are provided as per the Requirement & Design.Well point Dewaterng Pumps with Engine Drive and Trailer are
Applications : Handling Clean or Turbid water, Condensate Water, Fire Fighting, Air Conditioning, Irrigation, Sprinkler System, Cooling Towers, Booster Services, Sea Water, Mines, Chemicals and Petrochemicals, Dyes and Intermediates , Acids, Hydrocarbons, Distilleries, Liquors, Thermic Fluid, Hot Oils, Brine, Alkaline Solutions, Solvents, Corrosive Liquids and Slurries, Pulp&Paper Stock, Etc.